About this product
Water-washable UV resin | Compatible with 365–405 nm MSLA/LCD printers | Black finish for detailed prints | Rinse clean with water — no harsh solvents needed
The ANYCUBIC Water Wash Resin 2.0 Black is designed for MSLA/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.
Features
Water-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing
Compatible with 365–405 nm MSLA/LCD resin printers
Black colour for display models, miniatures, and detail-focused prints
Cured hardness of 82–85 HD with tensile strength of 38–43 MPa
Low volume shrinkage rate of 2.2–5.5% for dimensionally accurate output
Post-cure in 3 minutes at 405 nm UV (25,000–30,000 µW/cm²)
Post-cured resin disposable as standard plastic waste
Specifications
Colour: Black (#212721)
Resin Size: 1kg
Pre-print preparation: Shake well before use
Print environment: 20-40 ℃
First layer exposure duration: 25-40 s
Normal exposure duration: 2-2.5 s
Print temperature: 20-50 ℃
Material: Hydrophilic group-modified light-curing resin
Wavelength: 365-405 nm
Viscosity: 190-230/mPa·s(25℃)
Density: 1.07-1.09/g/cm³
Hardness: 82-85 HD
Tensile Strength: 38-43 MPa
Elongation at Break: 16-22%
Bending Modulus: 48-60 MPa
Bending Strength: 2300-3000 MPa
Young’s Modulus: 1100-1300 MPa
Izod Impact Strength: 133 J/m
Volume Shrinkage Rate: 2.2-5.5%
Cleaning: 95% IPA
Washing duration: ≥3 mins
UV Wavelength: 405 nm
Curing Temperature: 18-30 ℃
UV Intensity: 25000-30000 uW/cm²
Curing time: 3 mins
Disposal: Post-UV-curing resin is treated as plastic waste
Cleaning: Water
Washing duration: Medium ≥5 min
UV Wavelength: 405 nm
Curing Temperature: 18-30 ℃
UV Intensity: 25000-30000 uW/cm²
Curing time: 3 mins
Disposal:
1. Do not drain wastewater into sewers to avoid contaminating groundwater.
2. After cleaning, let the wastewater sit in the tank for a period of time.
3. Place it under sunlight to allow the resin in the tank to fully cure.
4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.
What’s in the Box
Anycubic Water Wash Resin 2.0 – Black x1
The ANYCUBIC Water Wash Resin 2.0 Black is designed for MSLA/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.
Features
Water-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing
Compatible with 365–405 nm MSLA/LCD resin printers
Black colour for display models, miniatures, and detail-focused prints
Cured hardness of 82–85 HD with tensile strength of 38–43 MPa
Low volume shrinkage rate of 2.2–5.5% for dimensionally accurate output
Post-cure in 3 minutes at 405 nm UV (25,000–30,000 µW/cm²)
Post-cured resin disposable as standard plastic waste
Specifications
Colour: Black (#212721)
Resin Size: 1kg
Pre-print preparation: Shake well before use
Print environment: 20-40 ℃
First layer exposure duration: 25-40 s
Normal exposure duration: 2-2.5 s
Print temperature: 20-50 ℃
Material: Hydrophilic group-modified light-curing resin
Wavelength: 365-405 nm
Viscosity: 190-230/mPa·s(25℃)
Density: 1.07-1.09/g/cm³
Hardness: 82-85 HD
Tensile Strength: 38-43 MPa
Elongation at Break: 16-22%
Bending Modulus: 48-60 MPa
Bending Strength: 2300-3000 MPa
Young’s Modulus: 1100-1300 MPa
Izod Impact Strength: 133 J/m
Volume Shrinkage Rate: 2.2-5.5%
Cleaning: 95% IPA
Washing duration: ≥3 mins
UV Wavelength: 405 nm
Curing Temperature: 18-30 ℃
UV Intensity: 25000-30000 uW/cm²
Curing time: 3 mins
Disposal: Post-UV-curing resin is treated as plastic waste
Cleaning: Water
Washing duration: Medium ≥5 min
UV Wavelength: 405 nm
Curing Temperature: 18-30 ℃
UV Intensity: 25000-30000 uW/cm²
Curing time: 3 mins
Disposal:
1. Do not drain wastewater into sewers to avoid contaminating groundwater.
2. After cleaning, let the wastewater sit in the tank for a period of time.
3. Place it under sunlight to allow the resin in the tank to fully cure.
4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.
What’s in the Box
Anycubic Water Wash Resin 2.0 – Black x1
