About this product
Carbon fibre reinforced PETG | Satin texture conceals layer lines | Superior impact and weather resistance | Easy to print
The Anycubic PETG-CF Satin Carbon Fiber Filament is designed for FDM makers who need more than standard PETG can offer. Carbon fibre reinforcement delivers greater rigidity and impact resistance than regular PETG, allowing printed parts to handle high pressure and heavy loads without snapping. The carbon fibre infusion also conceals layer lines and imparts a refined satin texture with a subtle luster — well suited to vehicle parts, sci-fi models, and functional prototypes. On top of its structural strengths, PETG-CF offers reliable water and weather resistance, making it a practical choice for parts used in demanding or outdoor-adjacent environments. At 1kg on a standard spool, this Indigo Blue variant gives you a full run of material ready to load and print.
Features
Carbon fibre reinforcement provides superior rigidity and impact resistance over standard PETG
Satin finish conceals layer lines for a cleaner, more refined surface appearance
Water and weather resistant — suitable for functional and semi-outdoor applications
Compatible with FDM 3D printers
1kg spool — Indigo Blue (#0E4174)
Specifications
Colour: Indigo Blue (#0E4174)
Printer Technology: FDM (Fused Deposition Modeling)
Supporting Filaments: PETG-CF
Dry Out Before Use: Required
Drying Condition: Convection oven 60-65 °C, 6-8 h
ACE Compatibility: Compatible
Nozzle Size: Recommended 0.4 mm or above
Nozzle Material: Hardened steel
Printing Temperature: 240-270 ℃
Heated Bed Temperature: 65-70 ℃
Recommended Printing Speed: 40-250 mm/s
Cooling Time: 6 s
Maximum Volume Speed (Flow Rate): 11 mm³/s
Density: 1.32 g/cm³
Melt Index: 14.1±1.6 g/10 min (190℃/2.16kg)
Melting Point Temperature: 221 ℃
Vicat Softening Temperature: 74 ℃
Heat Deflection Temperature (0.45MPa): 67 ℃
Saturated Water Absorption Rate: 0.38%
Young’s Modulus: 2550±100 Mpa
Tensile Strength: 54±2 Mpa
Elongation at Break: 12±1%
Bending Modulus: 3100±150 Mpa
Bending Strength: 88±2 MPa
lzod lmpact Strength (X-Y): 60±4 kJ/m²
Tensile Strength (Z): 37±3 MPa
Filament Type: Functional & Aesthetic filaments
Recommend to Print: Toys, functional decorative parts, and fandom
Intelligent Identification: Supported
Reusable Filament Spool: Supported
What’s in the Box
Anycubic PETG-CF Satin Carbon Fiber Filament 1kg – Indigo Blue x1
The Anycubic PETG-CF Satin Carbon Fiber Filament is designed for FDM makers who need more than standard PETG can offer. Carbon fibre reinforcement delivers greater rigidity and impact resistance than regular PETG, allowing printed parts to handle high pressure and heavy loads without snapping. The carbon fibre infusion also conceals layer lines and imparts a refined satin texture with a subtle luster — well suited to vehicle parts, sci-fi models, and functional prototypes. On top of its structural strengths, PETG-CF offers reliable water and weather resistance, making it a practical choice for parts used in demanding or outdoor-adjacent environments. At 1kg on a standard spool, this Indigo Blue variant gives you a full run of material ready to load and print.
Features
Carbon fibre reinforcement provides superior rigidity and impact resistance over standard PETG
Satin finish conceals layer lines for a cleaner, more refined surface appearance
Water and weather resistant — suitable for functional and semi-outdoor applications
Compatible with FDM 3D printers
1kg spool — Indigo Blue (#0E4174)
Specifications
Colour: Indigo Blue (#0E4174)
Printer Technology: FDM (Fused Deposition Modeling)
Supporting Filaments: PETG-CF
Dry Out Before Use: Required
Drying Condition: Convection oven 60-65 °C, 6-8 h
ACE Compatibility: Compatible
Nozzle Size: Recommended 0.4 mm or above
Nozzle Material: Hardened steel
Printing Temperature: 240-270 ℃
Heated Bed Temperature: 65-70 ℃
Recommended Printing Speed: 40-250 mm/s
Cooling Time: 6 s
Maximum Volume Speed (Flow Rate): 11 mm³/s
Density: 1.32 g/cm³
Melt Index: 14.1±1.6 g/10 min (190℃/2.16kg)
Melting Point Temperature: 221 ℃
Vicat Softening Temperature: 74 ℃
Heat Deflection Temperature (0.45MPa): 67 ℃
Saturated Water Absorption Rate: 0.38%
Young’s Modulus: 2550±100 Mpa
Tensile Strength: 54±2 Mpa
Elongation at Break: 12±1%
Bending Modulus: 3100±150 Mpa
Bending Strength: 88±2 MPa
lzod lmpact Strength (X-Y): 60±4 kJ/m²
Tensile Strength (Z): 37±3 MPa
Filament Type: Functional & Aesthetic filaments
Recommend to Print: Toys, functional decorative parts, and fandom
Intelligent Identification: Supported
Reusable Filament Spool: Supported
What’s in the Box
Anycubic PETG-CF Satin Carbon Fiber Filament 1kg – Indigo Blue x1
