About this product
Dual-colour gradient silk finish | Smooth, high-lustre surface | Compatible with 1.75 mm FDM printers | Printable at 50–250 mm/s | Intelligent identification supported
The Anycubic PLA Silk Dual Filament in Black/Purple is designed for makers, artists, and hobbyists who want their prints to do more than just hold a shape. The dual-colour gradient construction blends deep black and rich purple into a seamlessly shifting, silk-like finish that catches the light differently from every angle — ideal for decorative parts, fan art, figurines, and display pieces. By adjusting nozzle temperature and print speed within the recommended 210–240 °C and 50–250 mm/s ranges, you can dial the surface gloss up or down to suit the look you're after. The filament supports intelligent identification when paired with compatible Anycubic printers, streamlining setup automatically. For best results, dry the filament at 55–65 °C for 6–8 hours before printing, and use a nozzle of 0.4 mm or larger. A reliable, visually striking material for FDM prints that deserve a premium finish.
Features
Dual-colour gradient blends black and purple for a rich, layered visual effect
Silk-like lustre that shifts with viewing angle, giving prints a premium aesthetic
Adjustable surface gloss — tune temperature and speed to control sheen level
Compatible with all 1.75 mm FDM printers; no special hardware required
Supports intelligent identification on compatible Anycubic printers for seamless setup
Recommended for decorative parts, fan art, figurines, and display models
Certified to RoHS, REACH, and SDS standards
Specifications
Colour: Black Purple (#212721,#7249C7)
Dry Out Before Use: Recommended
Drying Condition: 55-65℃, 6-8h
ACE Compatibility: Compatible
Nozzle Size: Recommended 0.4 mm or above
Printing Temperature: 210-240 ℃
Heated Bed Temperature: 55-56 ℃
Recommended Printing Speed: 50-250 mm/s
Maximum Volume Speed (Flow Rate): 8 mm³/s
Density: 1.22 g/cm³
Melt Index: 9±1 g/10 min (190℃/2.16kg)
Melting Point Temperature: 164 ℃
Vicat Softening Temperature: 54 ℃
Heat Deflection Temperature (0.45MPa): 53 ℃
Young's Modulus: 2000±200 MPa
Tensile Strength: 37±4 MPa
Elongation at Break: 28±5%
Bending Modulus: 2400±160 MPa
Bending Strength: 66±4 MPa
lzod lmpact Strength (X-Y): 20±2 kJ/m²
Tensile Strength (Z): 12±4 MPa
Filament Type: Aesthetic filaments
Recommend to Print: Decorative parts, fandom, artworks
Intelligent Identification: Supported
Reusable Filament Spool: Supported
Size: 1KG
What's in the Box
Anycubic PLA Silk Dual Filament 1kg - Black/Purple x1
The Anycubic PLA Silk Dual Filament in Black/Purple is designed for makers, artists, and hobbyists who want their prints to do more than just hold a shape. The dual-colour gradient construction blends deep black and rich purple into a seamlessly shifting, silk-like finish that catches the light differently from every angle — ideal for decorative parts, fan art, figurines, and display pieces. By adjusting nozzle temperature and print speed within the recommended 210–240 °C and 50–250 mm/s ranges, you can dial the surface gloss up or down to suit the look you're after. The filament supports intelligent identification when paired with compatible Anycubic printers, streamlining setup automatically. For best results, dry the filament at 55–65 °C for 6–8 hours before printing, and use a nozzle of 0.4 mm or larger. A reliable, visually striking material for FDM prints that deserve a premium finish.
Features
Dual-colour gradient blends black and purple for a rich, layered visual effect
Silk-like lustre that shifts with viewing angle, giving prints a premium aesthetic
Adjustable surface gloss — tune temperature and speed to control sheen level
Compatible with all 1.75 mm FDM printers; no special hardware required
Supports intelligent identification on compatible Anycubic printers for seamless setup
Recommended for decorative parts, fan art, figurines, and display models
Certified to RoHS, REACH, and SDS standards
Specifications
Colour: Black Purple (#212721,#7249C7)
Dry Out Before Use: Recommended
Drying Condition: 55-65℃, 6-8h
ACE Compatibility: Compatible
Nozzle Size: Recommended 0.4 mm or above
Printing Temperature: 210-240 ℃
Heated Bed Temperature: 55-56 ℃
Recommended Printing Speed: 50-250 mm/s
Maximum Volume Speed (Flow Rate): 8 mm³/s
Density: 1.22 g/cm³
Melt Index: 9±1 g/10 min (190℃/2.16kg)
Melting Point Temperature: 164 ℃
Vicat Softening Temperature: 54 ℃
Heat Deflection Temperature (0.45MPa): 53 ℃
Young's Modulus: 2000±200 MPa
Tensile Strength: 37±4 MPa
Elongation at Break: 28±5%
Bending Modulus: 2400±160 MPa
Bending Strength: 66±4 MPa
lzod lmpact Strength (X-Y): 20±2 kJ/m²
Tensile Strength (Z): 12±4 MPa
Filament Type: Aesthetic filaments
Recommend to Print: Decorative parts, fandom, artworks
Intelligent Identification: Supported
Reusable Filament Spool: Supported
Size: 1KG
What's in the Box
Anycubic PLA Silk Dual Filament 1kg - Black/Purple x1
